By default, the Tag Inspector Scanner uses a dynamic IP address; therefore, the free version of Tag Inspector and premium accounts will be a random IP. If you have an instance in which you must whitelist the scanner feature to scan your website here is the process:
- You must have a premium license; we cannot perform static IP scanning on the free version.
- Contact Tag Inspector support or your InfoTrust consultant to request that your Tag Inspector account is setup for static IP scanning.
- Whitelist the IP address(s) below based on the scan region you are using for your scans.
- Use the Scanner feature as you would normally; all of your scans will now be using a static IP address.
By default, scans are set to the United States, Virginia region, but Tag Inspector allows scans from various worldwide regions if that feature is enabled on your account. Be sure to whitelist the correct IPs based on your needs. (Whitelist both IPs for each region; the first is the primary IP and the second is the “fallback” IP; both could be used.) See the list below for reference:
Virginia, US
54.209.73.243
52.4.188.117
California, US
18.144.179.145
Sydney, Australia
13.210.90.80
13.237.118.160
Frankfurt, Germany
3.120.254.20
52.29.64.242
London, England
52.56.169.44
3.8.81.100
Paris, France
52.47.54.123
35.180.161.87
São Paulo, Brazil
54.232.19.119
54.232.166.63
Osaka, Japan
15.152.134.35
13.208.82.88
Montreal, Canada
3.98.172.117
3.98.205.45
